Base chassis MAN TGL 12.180
Wheel formula 4×2
Tank capacity, m3 5
The thickness of the tank wall, mm 5
The tank material St3 (carbon steel)
The cross section of the tank round
Design features of the tank
Rigidity The tank has internal baffles and outer frames
Hydraulic system opening rear bottoms Two side hydraulic cylinder to open rear bottom
The three-tier system of protection against overflow capacity – The valve technology in the neckline in the form of a stainless steel ball with a diameter of 100 mm in the basket

– Non-contact sensor located in the process the neck reacting to the approach of stainless steel ball, the result disables the drive of the compressor.

Limit vacuum/pressure One safety valve to limit pressure One safety valve to limit vacuum
Visual control of filling of the tank Two spherical viewing Windows located on the rear end of the tank
Inlet branch pipe, mm Du-100 is located in the lower part of the rear bottom of the tank with gate valve
Vacuum compressor
Model/type PNR-122/blade
The pump capacity, m3/h 730
The pump drive Using a mechanical belt drive
The nominal diameter of the vacuum-compressor Do 100
Parameters mass of the tanker
Curb weight, kg 7 000
Full weight, kg 12 800
The load distribution of the tanker truck total mass
On the front axle, kg 4 400
On rear bogie, kg 8 400
Model D0834LFL64 (Euro 5)
Type diesel
Power, HP 180
Model ZF 6S-800
Type manual 6-speed
Tire size 245/70R17,5
Dimensions tanker truck
Length, mm 7 350
Width, mm 2 500
Height, mm 2 600